Emotiva A-100 - Stereo Amplifier
Emotiva A-100 - Stereo Amplifier
Emotiva A-100 - Stereo Amplifier
Emotiva A-100 - Stereo Amplifier
,

Emotiva A-100 – Stereo Amplifier

Availability:

90 in stock
Wishlist
Compare

₹35,000.00

90 in stock

₹163,385.00 for 3 item(s)

Description

The BasX A-100 offers all the essential features that make a great audio component, like a heavy duty power supply, great sounding high-current short signal path Class A/B amplifiers, industry standard unbalanced audio inputs, and full-sized five-way binding post speaker terminals. The BasX A-100 delivers a solid 50 watts per channel into 8 Ohms and 80 Watts per channel into 4 Ohms; plenty to drive most speakers to satisfying listening levels. The BasX A-100 also offers several useful extra features that earn it the designation of Flex Amplifier. The BasX A-100 includes a standard trigger input and output, but it can also be configured to switch on automatically when it senses an incoming audio signal, which makes it perfect for use in a remote zone.

Categories: ,

Specification

Power Output (main outputs; two channels driven)
  • 50 watts / channel RMS; 8 Ohms; 20 Hz – 20 kHz; <0.05% THD.
  • 80 watts / channel RMS; continuous; into 4 ohms.
Power Output (headphone output; normal mode)
  • 8 Ohms: 60 mW / channel
  • 33 Ohms:  200 mW / channel
  • 47 Ohms:  250 mW / channel
  • 150 Ohms: 430 mW / channel
  • 300 Ohms: 440 mW / channel
  • 600 Ohms: 350 mW / channel
Power Output (headphone output; direct drive mode)
(requires internal jumper; USE WITH CAUTION)
  • 8 Ohms:  50 watts / channel
  • 33 Ohms:  12 watts / channel
  • 47 Ohms:  8.5 watts / channel
  • 150 Ohms:  2.6 watts / channel
  • 300 Ohms:  1.3 watts / channel
  • 600 Ohms:  0.6 watts / channel
Broad Band Frequency Response 20 Hz – 20 kHz + / – 0.08 dB at 1 watt
(-1 dB at 80 kHz).
Signal to Noise Ratio (8 Ohm load) > 110 dB; ref rated power; (A-weighted).
Minimum Recommended Load Impedance (per channel) 4 Ohms.
Damping Factor (8 Ohm load) > 500.
Input Sensitivity (for rated power; 8 Ohm load) 600 mV (0.6V).
Input Impedance 27 kOhms.
Input Connections Unbalanced (RCA); one each per channel.
Output Connections Loop output (RCA); one each per channel.
Speaker Output Connections Audiophile grade 5-way binding posts.
Headphone Output
  • Front panel jack; full sized 1/4”.
  • Headphone output is derived from the main speaker outputs via
  • high quality 220 Ohm resistors.
  • Optional high-power mode for driving low-efficiency planar headphones.
Trigger
  • The BasX A-100 may be configured to be turned on manually, or by a trigger signal from a preamp or processor, or to turn on automatically when it senses an audio signal on any of its inputs.
  • Manual Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required.
  • Trigger Output: 12 VDC; can drive any load up to 120 mA.
Front Panel Controls and Indicators Volume; analog potentiometer with machined aluminum knob and
illuminated status ring.
Rear Panel Controls
  • AC Power switch.
  • Line Voltage (protected slide switch).
  • Trigger Switch (mode) (On, Off, Auto).
Protection The BasX A-100 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.
Dimensions
  • (Unboxed) 8-1/2” wide x 3.125” high x 15” deep (including feet, connectors, Volume knob).
    (Boxed) 13” wide x 8” high x 18” deep.
Weight
  • 5.35 Kg (unboxed).
  • 6.8 Kg (boxed).

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Related products

Brands Carousel